Dell POWEREDGE M1000E - Manual (Page 1616)

1612 User Interface Commands
User Guidelines
The selected mode is valid if mode-change confirm is executed within 60
seconds. The selected mode is applied as operational mode on resetting the
configuration to factory defaults.
Example
console(config)#mode simple
Warning: Confirm mode selection within 60 seconds
using “mode-change confirm” command.
mode-change confirm
Use the mode-change confirm command to confirm the mode selection.
Syntax
mode-change confirm
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command must be executed within 60 seconds of executing the mode
simple or no mode simple command. The selected mode is applied as
operational mode.
Example
console(config)#mode-change confirm
quit
Use the quit command in User EXEC mode to close an active terminal
session by logging off the switch.
2CSPC4.XModular-SWUM200.book Page 1612 Thursday, March 10, 2011 11:18 AM