Dell POWEREDGE M1000E - Manual (Page 781)

802.1x Commands 781
Example
console#show dot1x
Administrative Mode..............Enabled
VLAN Assignment Mode.............Disabled
Monitor Mode.....................Disabled
show dot1x authentication-history
Use the show dot1x authentication-history command in Privileged EXEC
mode to display the dot1x authentication events and information during
successful and unsuccessful dot1x authentication processes. The command is
available to display all events, or events per interface, or only failure
authentication events in summary or in detail.
Syntax
show dot1x authentication-history { interface-id | all} [failed-auth-only]
[detail]
Parameter Description
The following table explains the output parameters.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is
enabled or disabled.
Parameter Description
Time Stamp Exact time at which the event occurs.
Interface Physical Port on which the event occurs.
MAC-Address Supplicant/Client MAC Address
VLAN assigned VLAN assigned to the client/port on authentication.
VLAN assigned
Reason
Type of VLAN ID assigned i.e Guest VLAN, Unauth,
Default, Radius Assigned or Monitor Mode VLAN ID.
Auth Status Authentication Status
Field Description
2CSPC4.XModular-SWUM200.book Page 781 Thursday, March 10, 2011 11:18 AM