Dell POWEREDGE M1000E - Manual (Page 1527)

Syslog Commands 1523
Example
The following example limits syslog messages displayed from an internal
buffer based on the severity level "error."
console(config)#logging buffered error
logging console
Use the logging console command in Global Configuration mode to limit
messages logged to the console based on severity. To disable logging to the
console terminal, use the no form of this command.
Syntax
logging console [ severity–level ]
no logging console
Parameter Description
Default Configuration
The default value for level is warnings.
Command Mode
Global Configuration mode
Parameter Description
severity–level (Optional) The number or name of the desired severity level.
Range:
[ 0 | emergencies ]
[ 1 | alerts ]
[ 2 | critical ]
[ 3 | errors ]
[ 4 | warnings ]
[ 5 | notifications ]
[ 6 | informational ]
[ 7 | debugging ]
2CSPC4.XModular-SWUM200.book Page 1523 Thursday, March 10, 2011 11:18 AM