Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual

Page 1270: Example, Show boot, Syntax, Parameter description

1268

Auto-Install Commands

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

The show switch command also displays the switch firmware synchronization

status.

Example

console#show auto-copy-sw

Stack Firmware Synchronization

Synchronization: Enabled

SNMP Trap status: Enabled

Allow Downgrade: Enabled

show boot

Use the show boot command in Privileged EXEC mode to display the auto

install configuration and the status.

Syntax

show boot

Parameter Description

This command does not require a parameter description.

Default Configuration

This command has no default configuration.

2CSPC4.XModular-SWUM200.book Page 1268 Thursday, March 10, 2011 11:18 AM