Dell POWEREDGE M1000E - Manual (Page 366)

366 Email Alerting Commands
mail-server ip-address
|
hostname
Use the mail-server ip-address | hostname command in Global
Configuration mode to configure the SMTP server IP address and change the
mode to Mail Server Configuration mode. The server address can be in the
IPv4, IPv6, or DNS name format. Use the no form of this command to
remove the configured SMTP server address.
Syntax
mail-server {ip-address ip-address | hostname hostname }
no mail-server { ip-address | hostname }
Parameter Description
Default Configuration
The default configuration for a mail server is shown in the table below.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Parameter Description
ip-address An IPv4 or IPv6 address.
hostname The DNS name of an SMTP server.
Field Default
Email Alert Mail Server Port 25
Email Alert Security Protocol none
Email Alert Username admin
Email Alert Password admin
2CSPC4.XModular-SWUM200.book Page 366 Thursday, March 10, 2011 11:18 AM