Dell POWEREDGE M1000E - Manual (Page 352)

352 Dynamic ARP Inspection Commands
Parameter Description
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following global parameters are displayed:
The following fields are displayed for each VLAN:
Example
console#show ip arp inspection vlan 10-12
Parameter Description
vlan-range A valid VLAN range.
Parameter Description
Source Mac Validation If Source Mac validation of ARP frame is enabled.
Destination Mac
Validation
If Destination Mac validation of ARP Response frame is
enabled.
IP Address Validation If IP address validation of ARP frame is enabled.
Field Description
VLAN The VLAN-ID for each displayed row.
Configuration Whether DAI is enabled on the VLAN.
Log Invalid Whether logging of invalid ARP packets is enabled on the
VLAN.
ACL Name ARP ACL Name if configured on the VLAN.
Static flag If the ARP ACL is configured static on the VLAN.
2CSPC4.XModular-SWUM200.book Page 352 Thursday, March 10, 2011 11:18 AM