Dell POWEREDGE M1000E - Manual (Page 1045)

Multicast Commands 1045
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
The following fields are displayed:
Example
console#show ip pimsm rp hash 224.1.2.0
RP Address 192.168.10.1
Type Static
If no RP Group mapping exists on the router, the following message is
displayed:
No RP-Group mappings exist/learned on this router.ny
interface.
show ip pim rp mapping
The show ip pim rp mapping command is used in User EXEC and Privileged
EXEC modes to display the mappings for the PIM group to the active
rendezvous points. This command deprecates the show ip pimsm rp
candidate, show ip pimsm staticrp, show ip pimsm rp mapping commands.
Syntax
show ip pim rp mapping [ rp-address ]
rp-address — An RP address.
Default configuration
There is no default configuration for this command.
Field Description
RP Address Address of the RP
Type Origin from where this group mapping was learned.
2CSPC4.XModular-SWUM200.book Page 1045 Thursday, March 10, 2011 11:18 AM