Dell POWEREDGE M1000E - Manual (Page 408)

408 Ethernet CFM Commands
ethernet cfm domain
Use the ethernet cfm domain command in Global Configuration mode to
enter into maintenance domain config mode for an existing domain. Use the
optional level parameter to create a domain and enter into maintenance
domain config mode. In maintenance domain config mode, maintenance
associations are created and per-maintenance domain services can be
configured. Use the no form of the command to delete a maintenance
domain.
Syntax
ethernet cfm domain domain-name [level 0-7 ]
Parameter Description
Default Configuration
No CFM domains are pre-configured.
Command Mode
Global Configuration mode
ethernet cfm mep archive-hold-time show ethernet cfm statistics
ethernet cfm mip level debug cfm
Parameter Description Range Default Access
Maintenance
domain ID
Unique
identifier
maintenance
domain
0-7 for id None Read-write
Maintenance
domain name
Name of the
maintenance
domain
Alphanumeric
string of up to 43
characters
None Read-write
2CSPC4.XModular-SWUM200.book Page 408 Thursday, March 10, 2011 11:18 AM