Dell POWEREDGE M1000E - Manual (Page 153)

Command Groups 153
SNMP
show sflow polling Displays the sFlow polling instances created on
the switch.
PE
show sflow sampling Displays the sFlow sampling instances created
on the switch.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode a
show snmp Displays the SNMP status. PE
show snmp engineID Displays the SNMP engine ID. PE
show snmp filters Displays the configuration of filters. PE
show snmp group Displays the configuration of groups. PE
show snmp user Displays the configuration of users. PE
show snmp views Displays the configuration of views. PE
show trapflags Displays SNMP traps globally or displays
specific SNMP traps.
PE
snmp-server community Sets up the community access string to permit
access to SNMP protocol.
GC
snmp-server community-
group
Maps SNMP v1 and v2 security models to the
group name.
GC
snmp-server contact Sets up a system contact (sysContact) string. GC
snmp-server enable traps Enables SNMP traps globally or enables specific
SNMP traps.
GC
snmp-server engineID local Specifies the Simple Network Management
Protocol (SNMP) engine ID on the local switch.
GC
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets the system location string. GC
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 153 Thursday, March 10, 2011 11:18 AM