Dell POWEREDGE M1000E - Manual (Page 1153)

OSPFv3 Commands 1153
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub
area stub no-summary
Use the area stub no-summary command in Router OSPFv3 Configuration
mode disable the import of Summary LSAs for the stub area identified by
area-id .
Syntax
area area-id stub no-summary
no area area-id stub no-summary
• area-id — Valid OSPFv3 area identifier.
• so-summary — Disable the import of Summary LSAs for the stub area
identified by area-id.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1153 Thursday, March 10, 2011 11:18 AM