Dell POWEREDGE M1000E - Manual (Page 1188)

1188 OSPFv3 Commands
• nssa-external — Displays NSSA external LSAs.
•
prefix — Displays intra-area Prefix LSA.
• router — Displays router LSAs.
• unknown — Displays unknown area, AS or link-scope LSAs.
•
l ink-state-id — Specifies a valid link state identifier (LSID).
• adv-router — Shows the LSAs that are restricted by the advertising router.
• router-id — Specifies a valid router identifier.
• self-originate — Displays the LSAs in that are self originated.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the link state database
when OSPFv3 is enabled.
console#show ipv6 ospf database
Router Link States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1 0 4 80000034 54BD V6E--R- ----B
2.2.2.2 0 2 80000044 95A5 V6E--R- ----B
Network Link States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
2.2.2.2 636 636 80000001 8B0D V6E--R-
2CSPC4.XModular-SWUM200.book Page 1188 Thursday, March 10, 2011 11:18 AM