Dell POWEREDGE M1000E - Manual (Page 116)

116 Command Groups
DHCPv6
sntp Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
DP
show ip dhcp binding Displays the configured DHCP bindings. PE
show ip dhcp conflict Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
PE
show ip dhcp global
configuration
Displays the DHCP global configuration. PE
show ip dhcp pool Displays the configured DHCP pool or pools. UE or
PE
show ip dhcp server
statistics
Displays the DHCP server binding and message
counters.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode a
clear ipv6 dhcp Clears DHCPv6 statistics for all interfaces or for
a specific interface.
PE
dns-server Sets the IPv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
v6DP
domain-name Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
v6DP
ipv6 dhcp pool Enters IPv6 DHCP Pool Configuration mode. GC
ipv6 dhcp relay Configures an interface for DHCPv6 relay
functionality.
IC
ipv6 dhcp server Configures DHCPv6 server functionality on an
interface.
IC
prefix-delegation Defines Multiple IPv6 prefixes within a pool for
distributing to specific DHCPv6 Prefix
delegation clients.
v6DP
service dhcpv6 Enables DHCPv6 configuration on the router. GC
show ipv6 dhcp Displays the DHCPv6 server name and status. PE
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 116 Thursday, March 10, 2011 11:18 AM