Dell POWEREDGE M1000E - Manual (Page 1491)

SNMP Commands 1487
Syntax
snmp-server enable traps [acl | all | auto-copy-sw | captive-portal cp-type |
dot1q | dvrmp | link | maclock | multiple-users | ospf ospftype | ospfv3
ospfv3type |pim |poe | snmp authentication | spanning-tree | stack |vrrp]
no snmp-server enable traps [acl | all| auto-copy-sw | captive-portal cp-type
| dot1q | dvrmp | link | maclock| multiple-users | ospf ospftype | ospfv3
ospfv3type | pim | poe | snmp authentication | spanning-tree |stack|vrrp ]
• cp-type - { all, client-auth-failure, client-connect, client-db-full,
client-disconnect }
• ospftype - { all | errors { all | authentication failure | bad packet |
config error | virt authentication failure | virt bad packet | virt config
error } | lsa { all | lsa-maxage | lsa-originate } | overflow { all | lsdb-
overflow | lsdbapproaching- overflow } | retransmit {all | packets |
virt-packets } | state-change { all | if state change | neighbor state
change | virtifstate change | virtneighbor state change }}
• ospfv3type - {all | errors { all | bad packet | config error | virt bad
packet | virt config error } | lsa { all | lsa-maxage | lsa-originate } |
overflow { all | lsdb-overflow | lsdb-approaching-overflow } |
retransmit {all | packets | virt-packets } | state-change { all | if state
change | neighbor state change | virtif state change | virtneighbor
state change }}
Parameter Description
Parameter Description
acl Enable traps on ACL match events.
all Enable all traps (not recommended).
auto-copy-sw Enable traps on automatic download of switch software.
captive-portal Enable captive-portal traps.
dot1q Enable traps on VLAN configuration failures.
dvmrp Enable dvmrp traps.
maclock Enable traps on MAC locking violations.
ospf Enable OSPF event traps.
ospfv3 Enable OSPFv3 event traps.
2CSPC4.XModular-SWUM200.book Page 1487 Thursday, March 10, 2011 11:18 AM