Dell POWEREDGE M1000E - Manual (Page 1256)

1256 Virtual Router Redundancy Protocol Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
vlan2 5 192.168.5.55 Enable Initialize
show vrrp interface stats
Use the show vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan vlan-id vr-id
• vlan-id — Valid VLAN ID.
• vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1256 Thursday, March 10, 2011 11:18 AM