Dell POWEREDGE M1000E - Manual (Page 1605)

Time Ranges Commands 1601
83
Time Ranges Commands
Time ranges are used with time-based ACLs to restrict their application due
to specific time slots.
This chapter explains the following commands:
time-range
Use the time-range command in Global Configuration mode to create a time
range identified by name , consisting of one absolute time entry and/or one or
more periodic time entries.
If a time range by this name already exists, this command enters Time-Range
Configuration mode to allow updating the time range entries.
Use the no form of this command to delete a time-range identified by
name .
Syntax
time-range name
no time-range name
Parameter Description
Default Configuration
This command has no default configuration.
time-range periodic
absolute show time-range
Parameter Description
name A case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the time range. An alpha-numeric string is
defined as consisting of only alphabetic, numeric, dash,
underscore, or space characters.
2CSPC4.XModular-SWUM200.book Page 1601 Thursday, March 10, 2011 11:18 AM