Dell POWEREDGE M1000E - Manual (Page 109)

Command Groups 109
TACACS+
VLAN
Command Description Mode a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and
statistics.
PE
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
GC
tacacs-server timeout Sets the interval for which the switch waits for a
server host to reply.
GC
timeout Specifies the timeout value in seconds. TC
Command Description Mode a
dvlan-tunnel ethertype Configures the EtherType for the interface. GC
interface vlan Enters the interface configuration (VLAN)
mode.
GC
interface range vlan Enters the interface configuration mode to
configure multiple VLANs.
GC
mode dvlan-tunnel Enables Double VLAN tunneling on the
specified interface.
IC
name Configures a name to a VLAN. IC
protocol group Attaches a vlanid to the protocol-based VLAN
identified by groupid.
VLAN
protocol vlan group Adds the physical unit/slot/port interface to the
protocol-based VLAN identified by groupid.
IC
2CSPC4.XModular-SWUM200.book Page 109 Thursday, March 10, 2011 11:18 AM