Dell POWEREDGE M1000E - Manual (Page 1063)

IPv6 Multicast Commands 1063
3001::1 BSR
show ipv6 pimsm rp mapping
Use the show ipv6 pimsm rp mapping command to display all group-to-RP
mappings of which the router is aware (either configured or learned from the
bootstrap router (BSR). If no RP is specified, all active RPs are displayed
Syntax
show ipv6 pimsm rp mapping [ rp-address ]
• rp-address —IP address of RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm rp mapping
Group Address..................................
FF1E::/64
RP Address.....................................
2001::1
origin.........................................
Static
Group Address..................................
FF1E::/64
2CSPC4.XModular-SWUM200.book Page 1063 Thursday, March 10, 2011 11:18 AM