Show ipv6 mld-proxy groups, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 997: Command mode, User guidelines, Show ipv6 mld, Proxy groups

IPv6 Routing Commands
997
Interface Index.............................. vlan 10
Admin Mode................................... Enabled
Operational Mode............................. Enabled
Version...................................... 3
Num of Multicast Groups...................... 0
Unsolicited Report Interval.............. 1
Querier IP Address on Proxy Interface..... fe80::1:2:5
Older Version 1 Querier Timeout.......... 00:00:00
Proxy Start Frequency.....................1
show ipv6 mld-proxy groups
Use the show ipv6 mld-proxy groups command to display information about
multicast groups that the MLD Proxy reported.
Syntax
show ipv6 mld-proxy groups
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following parameters are displayed by this command:
Field
Description
Interface
The MLD Proxy interface.
Group Address The IP address of the multicast group.
2CSPC4.XModular-SWUM200.book Page 997 Thursday, March 10, 2011 11:18 AM