Dell POWEREDGE M1000E - Manual (Page 986)

986 IPv6 Routing Commands
Example
The following example displays the IPv6 status of forwarding mode and IPv6
unicast routing mode.
console#show ipv6 brief
IPv6 Forwarding Mode........................ Enable
IPv6 Unicast Routing Mode................... Disable
IPv6 Hop Limit...............................1
show ipv6 interface
Use the show ipv6 interface command in Privileged EXEC mode to show the
usability status of IPv6 interfaces. The output of the command includes the
method of assignment for each IPv6 address that is either autoconfigured or
leased from a DHCP server. Global addresses with no annotation are assumed
to be manually configured.
Syntax
show ipv6 interface [brief] [loopback loopback-id | tunnel tunnel-id | vlan
vlan-id [prefix]]
Syntax Description
Default Configuration
Displays all IPv6 interfaces.
Command Mode
User EXEC, Privileged EXEC modes
Parameter Description
loopback-id Valid loopback interface ID
tunnel-id Valid tunnel interface ID
vlan-id Valid VLAN ID
prefix Display IPv6 Interface Prefix Information.
2CSPC4.XModular-SWUM200.book Page 986 Thursday, March 10, 2011 11:18 AM