Dell POWEREDGE M1000E - Manual (Page 864)

864 DVMRP Commands
DVMRP INTERFACE STATUS
Interface Interface Mode Protocol State
--------- -------------- --------------
show ip dvmrp interface
Use the show ip dvmrp interface command in Privileged EXEC mode to
display the interface information for DVMRP on the specified interface.
Syntax
show ip dvmrp interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 DVMRP.
console(config)#show ip dvmrp interface vlan 11
Interface Mode............................. Disable
show ip dvmrp neighbor
Use the show ip dvmrp neighbor command in Privileged EXEC mode to
display the neighbor information for DVMRP.
Syntax
show ip dvmrp neighbor
2CSPC4.XModular-SWUM200.book Page 864 Thursday, March 10, 2011 11:18 AM