Dell POWEREDGE M1000E - Manual (Page 949)

IPv6 PIM Commands 949
Syntax
ipv6 pim ssm { default | group-address group-mask }
no ipv6 pim ssm { default | group-address group-mask }
Parameter Description
Default Configuration
There are no group addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim ssm ffe8::01::00:00:00 /96
show ipv6 pimsm
Use the show ipv6 pimsm command to display global status of IPv6 PIMSM
and its IPv6 routing interfaces.
Syntax
show ipv6 pimsm
Default Configuration
There is no default configuration for this command.
Parameter Description
default Defines the SSM range access list to 232/8.
group-address An IPv6 multicast group address.
group-mask An IPv6 mask in /prefix form.
2CSPC4.XModular-SWUM200.book Page 949 Thursday, March 10, 2011 11:18 AM