Syntax, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual

Page 1011: User guidelines, Example

IPv6 Routing Commands

1011

Syntax

traceroute ipv6 {

ip-address

hostname

}

[

port

]

•

ipv6-address

— Destination IPv6 address.

•

hostname

— Hostname to ping (contact). (Range: 1–158 characters). The

command allows spaces in the host name when specified in double quotes.

For example,

console(config)#traceroute "host name"

•

port

— UDP port used as the destination of packets sent as part of the

traceroute. This port should be an unused port on the destination system.

(Range: 0–65535)

Default Configuration

33434 is the default port value.

Command Mode

Privileged EXEC mode

User Guidelines

This command has no user guidelines.

Example

The following example discovers the packet routes on a hop-by-hop basis.

console#traceroute ipv6 2020:1::1

Tracing route over a maximum of 20 hops

1 * N * N * N

2CSPC4.XModular-SWUM200.book Page 1011 Thursday, March 10, 2011 11:18 AM