Parameter description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 265: User guidelines, Example, Mac address-table multicast forward-all, Syntax, Mac address-table, Multicast forward-all

Address Table Commands
265
Parameter Description
Default Configuration
The default for this command is not forbidden.
Command Mode
Global configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example forbids forwarding unregistered multicast addresses
on VLAN8.
console(config)#mac address-table multicast forbidden
forward-unregistered vlan 8
mac address-table multicast forward-all
Use the mac address-table multicast forward-all command in Interface
Configuration mode to enable forwarding of all Multicast packets. To restore
the default, use the no form of the mac address-table multicast forward-all
command.
Syntax
mac address-table multicast forward-all vlan
vlan-id
no mac address-table multicast forward-all vlan
vlan-id
Parameter Description
Parameter
Description
vlan
vlan-id
Valid VLAN ID (Range 1-4093).
Parameter
Description
vlan
vlan-id
A valid VLAN ID (Range 1-4093).
2CSPC4.XModular-SWUM200.book Page 265 Thursday, March 10, 2011 11:18 AM