Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual

Page 971: Example, Ipv6 mtu, Syntax, Parameter description

IPv6 Routing Commands

971

no ipv6 mld router

Default Configuration

MLD is disabled by default.

Command Mode

Global Configuration mode
Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

console(config-if-vlan3)#ipv6 mld router

ipv6 mtu

Use the ipv6 mtu command in Interface Configuration mode to set the

maximum transmission unit (MTU) size, in bytes, of IPv6 packets on an

interface. This command replaces the default MTU with a new MTU value.

Syntax

ipv6 mtu <

bytes

no ipv6 mtu

Parameter Description

Default Configuration

The default MTU is 1500.

Parameter

Description

bytes

The maximum transmission size of an IPv6 frame. (Range:

1280-1500)

2CSPC4.XModular-SWUM200.book Page 971 Thursday, March 10, 2011 11:18 AM