Dell POWEREDGE M1000E - Manual (Page 637)

QoS Commands 637
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC
mode to display the current IP DSCP mapping to internal traffic classes for a
specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP Traffic Class
------------- -------------
0(be/cs0 1
1 1
2 1
3 1
4 1
5 1
6 1
7 1
2CSPC4.XModular-SWUM200.book Page 637 Thursday, March 10, 2011 11:18 AM