Dell POWEREDGE M1000E - Manual (Page 1133)

OSPF Commands 1133
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following examples display information about OSPF neighbors on the
specified Ethernet and IP interfaces.
console#show ip ospf neighbor 99.9.9.9
Interface.................................... Vl12
Neighbor IP Address.......................... 5.5.5.5
Interface Index.............................. 723
Area Id...................................... 0.0.0.0
Options...................................... 0x42
Router Priority.............................. 1
Dead timer due in (secs)..................... 31
Up Time......................... 0 days 0 hrs 2 mins 17 secs
State........................................ Full/DR
Events....................................... 5
Retransmission Queue Length.................. 0
Parameter Description
interface-type Interface type – only supported type is vlan.
interface-number A valid interface number.
neighbor-id Valid IP address of the neighbor.
2CSPC4.XModular-SWUM200.book Page 1133 Thursday, March 10, 2011 11:18 AM