Dell POWEREDGE M1000E - Manual (Page 851)

DHCPv6 Commands 851
FILE LOCATION: C:\My Documents\ActiveProjects\2CSPC7000-SWUM400 Dell Zeiss CLI
Guide\working\DHCPv6.fm
D EL L C O NF I D E N TI A L – P R EL I M I N A RY 3 /1 0 / 1 1 - F O R P R O O F O N LY
show ipv6 dhcp
Use the show ipv6 dhcp command in Privileged EXEC mode to display the
DHCPv6 server name and status.
Syntax
show ipv6 dhcp
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:
show ipv6 dhcp binding
Use the show ipv6 dhcp binding command in Privileged EXEC mode to
display the configured DHCP pool.
Syntax
show ipv6 dhcp binding [ ipv6-address ]
• ipv6-address — Valid IPv6 address.
2CSPC4.XModular-SWUM200.book Page 851 Thursday, March 10, 2011 11:18 AM