Dell POWEREDGE M1000E - Manual (Page 560)

560 Multicast VLAN Registration Commands
show mvr members
Use the show mvr members command in Privileged EXEC mode to display
the MVR membership groups allocated.
Syntax
show mvr members [ A.B.C.D ]
Parameter Description
The parameter is a valid multicast address in IPv4 dotted notation. The
following table explains the output parameters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
The following table lists the completion messages.
Examples
console#show mvr members
Parameter Description
MVR Group IP MVR group multicast IP address.
Status The status of the specific MVR group. It can
be active or inactive.
Members The list of ports which participates in the
specific MVR group.
Message Type Message Description
Successful Completion Message None
Error Completion Message MVR disabled
2CSPC4.XModular-SWUM200.book Page 560 Thursday, March 10, 2011 11:18 AM