Dell POWEREDGE M1000E - Manual (Page 883)

IGMP Commands 883
show ip igmp groups
Use the show ip igmp groups command in User EXEC or Privileged EXEC
modes to display the registered multicast groups on the interface. If detail is
specified, this command displays the registered multicast groups on the
interface in detail.
Syntax
show ip igmp groups [interface-type interface-number] [detail]
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 1.
console#show ip igmp groups interface vlan 3 detail
REGISTERED MULTICAST GROUP DETAILS
Version1 Version2 Group
Multicast Last Up Expiry Host Host Compat
IP Address Reporter Time Time Timer Timer Mode
--------------- ------------ ---------- --------- ------- -------- -----
225.0.0.5 1.1.1.5 00:00:05 00:04:15 ------ 00:04:15 v2
Parameter Description
interface-type
interface-number
Interface type of VLAN and a valid VLAN ID.
2CSPC4.XModular-SWUM200.book Page 883 Thursday, March 10, 2011 11:18 AM