Dell POWEREDGE M1000E - Manual (Page 1453)

Serviceability Tracing Packet Commands 1449
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#debug ip vrrp
debug ipv6 dhcp
Use the debug ipv6 dhcp command in Privileged EXEC mode to display
debug information about DHCPv6 client activities and to trace DHCPv6
packets to and from the local DHCPv6 client. To disable debugging, use the
no form of the command.
Syntax
debug ipv6 dhcp
no debug ipv6 dhcp
Parameter Description
This command does not require a parameter description.
Default Configuration
Debugging for the DHCP for IPv6 is disabled by default.
Command Mode
Privileged EXEC
User Guidelines
DHCPv6 client already has packet tracing. This command turns the packet
tracing on.
Examples
console#debug ipv6 dhcp
2CSPC4.XModular-SWUM200.book Page 1449 Thursday, March 10, 2011 11:18 AM