Dell POWEREDGE M1000E - Manual (Page 1342)

1340 Configuration and Image File Commands
boot system
Use the boot system command in Privileged EXEC mode to specify the
system image that the device loads at startup.
Syntax
boot system [unit-id][image1 | image2]
• image1 | image2 — Image file.
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
delete backup-config show running-config
delete backup-image show startup-config
delete startup-config
dir
write
erase
Parameter Description
image1 Marks the given image as active for subsequent reboots.
image2 Marks the given image as active for subsequent reboots.
unit Unit to be used for this operation. If absent, command executes
on this node.
2CSPC4.XModular-SWUM200.book Page 1340 Thursday, March 10, 2011 11:18 AM