Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 86)

1-74
IM 04L31A01-01E
Control Operation Display > Tuning Display
Control parameter setup
display section
Control status indication section
(similar to the display on the
faceplate control group display)
Trend waveform display of PV (green),
SP (red), and OUT (yellow)
Setup display
AT:
PID number being auto tuned
SP No.: Current target setpoint number
PID No.: Current PID number
Group No.: PID number of the tuning
parameter to be manipulated
Time
PID number
Item name
Control > Overview Display
Auto/manual
PV input value
Target setpoint
Control output value
Tag name
Remote (REM) or local (LOC)
Run (RUN)/
Stop (STP)/
auto tuning (blinking AT)
Red indication when
alarm is occurring
Loop selection cursor
DIO operation monitoring function Analog retransmission
When monitoring
only DI or DO
Displayed using the
specified color when
DO or DI is ON
Displayed using the
specified color when
DO or DI is OFF
Displayed using the specified color when DO is ON
Displayed using the specified color when DO is OFF
When monitoring
both DI and DO
Displayed using the
specified color when DI is ON
Displayed using the specified color when DI is OFF
Output value
Tag comment
Tag
Label for ON
Label for OFF
1.16 Display Function