Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 283)

8-26
IM 04L31A01-01E
8.15 Measurement Function > Setting the Display
Direction, Background Color, Waveform Line
Width, Trip Line Width, Grid, and Scroll Time
This section explains how to set the display direction of the trends/bar graphs, the
background color, the waveform line width, the trip line width, the number of grids, and
the automatic switching interval of the displayed groups.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) > #4
soft key (select [Display]) > #4 soft key (select [View,Direction,LCD])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the
DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.