Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 5)

iv
IM 04L31A01-01E
Checking the Contents of the Package
Unpack the box and check the contents before operating the instrument. If some of the
contents are not correct or missing or if there is physical damage, contact the dealer
from which you purchased them.
CX2000
When you open the operation cover on the front panel, a name plate is located on the
back side of the cover. Check that the model name and suffix code given on the name
plate on the rear panel match those on the order.
Open the operation
cover
NO
SUFFIX
MODEL
WARNING
Do not remove the cover.
Repair by trained personnel only.
STYLE
MODEL and SUFFIX
/A6
/A6R
/A4F
/A4FR
/CST1
/D5
/M1
/N2
/P1
/TPS4
/PG1
/PG2
/BT1
–1
–2
–3
–5
–0
–1
–2
–1
–2
CX2000
CX2010
CX2020
CX2200
CX2210
CX2220
CX2410
CX2420
CX2610
CX2620
External
storage
medium
Model Suffix Code Optional Code Description
Communication
interface
Displayed language
Options
Number of internal control loops: 0, number of inputs for measurement: 10 ch
Number of internal control loops: 0, number of inputs for measurement: 0 ch
Number of internal control loops: 0, number of inputs for measurement: 20 ch
Number of internal control loops: 2, number of inputs for measurement: 10 ch
Number of internal control loops: 2, number of inputs for measurement: 0 ch
Number of internal control loops: 2, number of inputs for measurement: 20 ch
Number of internal control loops: 4, number of inputs for measurement: 10 ch
Number of internal control loops: 4, number of inputs for measurement: 20 ch
Number of internal control loops: 6, number of inputs for measurement: 10 ch
Number of internal control loops: 6, number of inputs for measurement: 20 ch
Floppy disk
100MB Zip disk
ATA flash memory card (Compact flash and adapter)
250MB Zip disk
Ethernet
Ethernet + RS-232 serial interface port
Ethernet + RS-422A/485 serial interface port
Japanese
English
6 measurement alarm outputs *1
6 measurement alarm output, 8 remote inputs *1
4 measurement alarm outputs, 1 FAIL output, 1 memory end output *1
4 measurement alarm outputs, 1 FAIL output, 1 memory end output,
8 remote inputs
*1
Control extension DIO (12 DIs, 12 DOs) *1*2
VGA output
Computation function
Three-wire isolated RTD (input for measurement)
24-VDC/AC power supply driven
24-VDC transmitter output (4 loops)
*1
Batch header
Program control (number of program patterns: 4) *3
Program control (number of program patterns: 30) *3
*1 Only one can be specified at once.
*2 Cannot be specified when the number of internal control loops is 0.
*3 Applies only to the internal control loops, either one can be specified.
NO. (Instrument Number)
When contacting the dealer from which you purchased the instrument, please give them
the instrument number.