Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 164)

4-4
IM 04L31A01-01E
Contents Initialized during Setting Changes
If you change the PID group number, 6/4 loop select, or control mode setting, the
following items under setting mode (control) are initialized.
PID number
The following items are initialized.
• Segment PID group number
6/4 loop select
Items other than the following are initialized.
• Tag, tag comment
• [#8 Detailed (DIO monitor and operation, etc...) > [#4 DI/DO label setting]
• [#9 Control math setting] > [#3 Constant]
[Control mode]
Items other than the following are initialized.
• Tag, tag comment
• [#5 Control group setting]
• [#8 Detailed (DIO monitor and operation, etc...) > [#3 DI/DO monitor and operation
setting]
• [#8 Detailed (DIO monitor and operation, etc...) > [#4 DI/DO label setting]
• [#9 Control math setting] > [#2 Logic math]
• [#9 Control math setting] > [#3 Constant]
4.1 Control > Control action, Input setting