Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 277)

8-20
IM 04L31A01-01E
8.13 Measurement Function > Setting the Scale
Division, Bar Graph Base Position, Scale
Position of Trend Displays
This section explains how to set the scale division on trend/bar graph displays, bar graph
base position, and the scale display position of each channel on trend displays.
The scale division, bar graph base position, and scale position of trend displays cannnot
be selected on 0 measurement channel models. An error message will appear if the
zone or graph setting screen is selected.
Procedure
Opening the Setting Display
• Setting the scale division, bar graph base position, scale position of trend displays
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#4 soft key (select [Display]) > #3 soft key (select [Zone,Graph])
The following display appears.
• Setting the number of digits displayed for the scale
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#4 soft key (select [Display]) > #4 soft key (select [View,Direction,LCD])
The following display appears.