Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 143)

3-2
IM 04L31A01-01E
Operation Section
1 3 2 1 2 1 2
Zip drive
ATA flash memory
card drive
Floppy disk drive
1. Drive for external storage medium
Depending on the specification you made at the time of purchase, a floppy disk drive,
a Zip drive, or an ATA flash memory card drive is installed.
2. Eject button (Zip disk access lamp)
Used when ejecting the external storage medium. On a Zip drive, the button is also
an access lamp. It illuminates when data is being written or read.
3. Floppy disk access lamp
Illuminates when data is being written or read.
Key Operation Section
START
STOP
ESC MENU DISP/
ENTER
USER FUNC
7
5
1
3 4
2
8 6
1. START key
Starts the data acquisition to the internal memory, and displays the waveform on the
trend display.
2. STOP key
Stops the data acquisition to the internal memory. Also stops the updating of the
waveform on the trend display.
3. ESC key
Used when canceling an operation. Also used when returning from setting mode to
operation mode.
4. MENU key
Used when switching from operation mode to setting mode. Also used when returning
from setting mode to operation mode.
5. USER key
Used to execute the assigned action.
6. FUNC key
If the key is pressed in operation mode, a soft key menu is displayed at the bottom
section of the display enabling the execution of various functions. The key is also
used when switching from setting mode to operation mode.
7. Soft keys
When a soft key menu is displayed at the bottom section of the display in operation,
setting, or basic setting mode, these soft keys are used to change the operation and
setup information.
8. Character/Number Input Keys
Used when entering characters or numbers.
The information above explains the basic functions of each key. For a description on
how to operate the keys, see section 3.2, “Basic Key Operations.”
3.1 Names and Functions of Sections