Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 289)

9-5
IM 04L31A01-01E
Data Save/Load Operations
9
• Off/On
To save the data on the selected channels, select [On]; otherwise, select [Off].
Setting Memory Timeup
When saving the data to the external storage medium in [Auto] mode, set the time for
saving the data when specifying the time using date and time.
• Timeup type
Select the time when data is to be saved from the following. Select [Off] if you are not
using this function.
Hour:
Every hour
Day: Every day at the [Time(hour] on the hour
Week: Every week on the day specified by [Day of the week] at the [Time(hour)] on the hour
Month: Every month on the day specified by [Date] at the [Time(hour)] on the hour
• Date/Day of the week
[Date] is a setting used when [Timeup type] is set to [Month]. Set the value in the
range of [1] to [28] (29 to 31 cannot be specified). [Date] also appears when [Timeup
type] is set to [Hour] or [Day]. However, the setting is valid only when [Timeup type] is
set to [Month].
[Day of the week] is a setting used when [Timeup type] is set to [Week]. Enter the
day of the week using the soft key.
• Time (hour)
Set the hour when the data is to be saved when [Timeup type] is set to [Day], [Week],
or [Month]. This setting is invalid when [Timeup type] is set to [Hour]. Set the hour in
the range of [00] to [23].
Setting the Auto Save Interval
• Auto save interval
The possible values from the following table is displayed as choices for the auto save
interval. The maximum auto save interval varies depending on the display update
rate (sampling interval is determined from the display update rate), the data type
(display data only/display data and event data), and the number of measurement and
computation channels to be stored.
Display Update
Rate (/DIV)
1min 2min 5min 10min 20min 30min 1h 2h 4h 10h
Sampling 2 4 10 20 40 60 120 240 480 1200
interval (s)
Auto save 10min 10min 10min 10min
interval 20min 20min 20min 20min
30min 30min 30min 30min
1h 1h 1h 1h 1h 1h 1h
2h 2h 2h 2h 2h 2h 2h
3h 3h 3h 3h 3h 3h
4h 4h 4h 4h 4h 4h 4h
6h 6h 6h 6h 6h 6h
8h 8h 8h 8h 8h 8h 8h
12h 12h 12h 12h 12h 12h
1day 1day 1day 1day 1day
2day 2day 2day 2day
3day 3day 3day
5day 5day 5day
7day 7day
10day 10day
14day
9.1 Acquiring Measurement Data to the Internal Memory and Saving Data to the External Storage Medium