Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 152)

3-11
IM 04L31A01-01E
Names of Parts, Display Modes, and Common Operations
3
3.3 Setting the Date and Time
This section explains how to set the date, time, and the daylight savings function of the
CX2000 internal clock.
Procedure
Opening the Setting Display
• Setting the Date and Time
Press the keys in the following sequence:
MENU key (switch to Set mode) > #6 soft key (select [Time])
From the operation display, use the above keys to open the following setting dialog
box.
• Setting Daylight Savings Time
Press the keys in the following sequence:
MENU key (switch to setting mode (Control)) > MENU key (switch to Set mode) >
#3 soft key (select [Trend/Save interval,Message,File,User key,DST])
The following display appears.