Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 322)

11-8
IM 04L31A01-01E
11.4 Displaying Logs (Checking Operations) and
System Information Display (Checking the
System Specifications)
Open the log display when checking the following operation information.
Error message, login/logout log, communication command log, FTP file transfer log, E-
mail transmission log, and Web browser operation log.
To check the specifications of the CX2000 (number of inputs, internal memory size,
options, MAC address, and firmware version number), open the system information
display.
This section explains how to display the above information.
Procedure
Opening the Log Display and System Information Display
1. In operation mode, press the FUNC key .
2. Press the [Next 1/2] soft key .
A soft key menu including the [Log] soft key appears.
3. Press the [Log] soft key .
The following soft key menu is displayed.
[Login] and [Web] soft keys appear only when those functions are being used.
Error message
log
Communication
command log
FTP file
transfer log
Login/logout log
System
information
E-mail transmission
log
Web browser
operation log
4. Press the soft key corresponding to the display you wish to show.
Explanation
Error Message Log
Date/time when the error occurred
Error code Error message
For details on error messages, see chapter 12, “Troubleshooting.”
Login/logout Log
Date/time of key login/logout
In: Key login
Out: Logout User name of the operation
Number of the log displayed at the bottom line/total number of logs