Yokogawa Data Acquisition with PID Control CX2000 User Manual

Page 222

5-13

IM 04L31A01-01E

Program Control Related Setup Operations

Setup Item

Event Output Settings

• Pattern number (Version 3.02 or later)

Displayed when event output is set for each program pattern. Select a program
pattern number for which to set event output.
If this item is not displayed, the event output is common to all program patterns.

• Event Types

Select whether to set event output for PV event or time event.
• Relay Output

Turn the relay output ON or OFF.

• Number

Select relay output terminal numbers from the following.
DO001-006, DO101-106, DO201-206, RO001-012 (only with the control DIO
expansion terminal block), SW001-SW036 (internal switches, style number S3 or
later)

• Action

Displays the relay output action (energize/de-energize) per the settings.

Program Pattern End Signal Setting (Not Per Pattern, but Overall)

• Relay Output

Turn the relay output ON or OFF.

• Number

• Action

Displays the relay output action (Energize/Deenergize) per the settings.

5.9 Event Output Settings