Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 269)

8-12
IM 04L31A01-01E
8.9 Measurement Function > Settings Related to
Messages Displayed on the Trend Display and
Write Operation
This section explains how to set and write the messages that can be displayed on the
trend display.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) > #3
soft key (select [Trend/Save interval,Message,File,User key,DST])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to one of the [Characters] boxes
under [Message].
A soft key menu is displayed at the bottom of the display.
2. Press the [Input] soft key .
A message pop-up window appears.
3. Enter the message using the character/number input key .
4. Press the DISP/ENTER key .
The message pop-up window closes, and the cursor moves to the next [Characters] box.
5. Repeat steps 1 to 4 to enter all the messages you wish.
6. Press the
DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Displaying and Writing messages
1. Press the FUNC key to display the soft key menu.
2. Press the [Message] soft key to display a list of messages.
A soft key menu used to select the message appears.