Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 285)

9-1
IM 04L31A01-01E
Data Save/Load Operations
9
Chapter 9 Data Save/Load Operations
9.1 Acquiring Measurement Data to the Internal
Memory and Saving Data to the External
Storage Medium
This section explains how to set the acquisition of measurement data (display data, event data,
manual sample data, TLOG data (only on models with the computation function option (/M1),
and report data (only on models with the computation function option (/M1)), as well as how to
set the storage of data to the external storage medium; and how to start/stop these operations.
Procedure
Opening the Setting Display
• Setting items other than the auto save interval
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > Hold down the FUNC key for 3
seconds (switch to basic setting mode) > #2 soft key (select [Memory,Memory
and trend,Memory timeup])
The following display appears.
• Setting the auto save interval, file header/directory name, and the data to be
saved during manual save operation.
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#3 soft key (select [Trend/Save interval,Message,File,User key,DST])
• When set to [Auto]
The following display appears.
• When set to [Manual]
The following display appears.