Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 309)

10-10
IM 04L31A01-01E
Selecting the Timer Number and Sum Scale of the TLOG Computation
• First-CH/Last-CH
You can assign channels numbers 31 to 60 as computation channels. Set a range of
channel numbers within this range for setting the timer number and sum scale of the
TLOG computation. The target channels also apply to [Tag], [Rolling average], and
[Alarm delay] settings.
• TLOG
• Timer No.
Select the timer number from [1], [2], and [3].
• Sum scale
Select the sum scale for calculating the sum (TLOG.SUM) from [Off], [/s], [/min],
and [/h]. The initial value is [Off] (simply compute the sum). You only have to set
the channels that are set to sum computation (TLOG.SUM).
Note
• When storing the data to the external storage medium, the data is stored to the TLOG
data file (.dtg extension).
• If the timer is specified, the TLOG data is written to the internal memory at the interval
specified by the timer. This operation is executed independent of the setting in the
[Action] box.
10.4 Setting TLOG Computations