Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 321)

11-7
IM 04L31A01-01E
Operations of Other Functions
11
• User name
Enter the user name using up to 16 alphanumeric characters. You cannot specify
“quit” as a user name. In addition, the user name cannot be set to all spaces. If the
user name already exists, a message “This username is already registered.” appears.
In this case, change the user name to a unique name.
• User ID (only when UserID Use/Not is set to [Use])
Enter the user ID using up to 4 alphanumeric characters.
• Password
Set the password using up to 6 characters.
• Enter setup
Select whether to allow the user that has logged in to enter basic setting mode
([Enable/Disable]).
Note
You cannot set all users to [Disable]. If you attempt to do so, the user with the smallest
registration number is automatically changed to [Enable] at the time the setup data is saved.
11.3 Key Operation Login/Logout