Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 339)

12-8
IM 04L31A01-01E
• Other Communication Errors
An English error message is returned via the communication interface. It is not
displayed on the screen.
Code Message
400 Input username.
401 Input password.
402 Select username from ‘admin’ or ‘user’.
403 Login incorrect, try again!
404 No more login at the specified level is acceptable.
410 Login successful. (The special user level)
411 Login successful. (The general user level)
420 Connection has been lost.
421 The number of simultaneous connection has been exceeded.
422 Communication has timed-out.
Note
For information regarding the communication function of the CX2000, see the DAQSTATION
CX1000/CX2000 Communication Interface User’s Manual (IM 04L31A01-17E) .
Status Messages
Code Message
500 Execution is complete.
501 Please wait a moment...
503 Data are being saved to media...
504 File is being loaded from media...
505 Formatting...
506 Memory save to media was interrupted.
507 Exchange media to continue the saving operation.
508 There is no file or directory.
510 Range cannot be changed during sampling or calculating.
511 MATH expression cannot changed during sampling, calculating or controlling.
512 Because memory save is ‘manual’ mode, FTP is not available.
520 Connecting to the line...
521 The data file is being transferred.
530 Setting data cannot be saved during output of setting data.
551 FTP test is being executed...
560 Range cannot be changed during sampling, calculating or controlling.
561 The Output calibration value is being writing...
562 Control function cannot be changed during sampling, calculating or controlling.
563 Hysteresis cannot be changed during sampling, calculating or controlling.
564 Program patameter cannot be changed during FE4 executing.
565 Grayed Items cannot be changed during program pattern operation.
566 The specified data cannot be loaded during FE4 executing.
567 When segment or setting method is changed data in the setting is initialized.
568 The specified data cannot be loaded during program operation.
Warning Messages
Code Message Reference
600 Measured data and Settings have been initialized. –
601 Measured data have been initialized. –
610 This username is already registered. See section 11.3.
12.1 Messages