Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 237)

6-12
IM 04L31A01-01E
6.4 Operations on the Program Selection Display
and Program Control Display (Only on Models
with the Program Control Option)
This section explains the operations that you can perform on the program selection
display and the program control display on models with the program control option. The
program selection display enables you to confirm program patterns and switch pattern
numbers; the program control display enables you to control programs such as run,
reset, and hold as well as monitor the control status.
Procedure
Displaying the Program Selection Display
On the control group display or control overview display, select [CONTROL] >
[PROGRAM] from the screen selection menu (see page 6-1.)
Displayed Information and Operations on the Program Selection Display
([Set mode] > [#3 Trend/Save interval > Time/div] > [Time/div] setting)
Display of time per division
Display soft key menu 2/3
Show the program control display
(valid only during program control)
Switches to control group display (style number S3 or later)
Switches to overview display (style number S3 or later)
Settings for pattern to be run as a result of communication function,
DI/DO, or internal switch action
Switch the program pattern
Display the window for starting the program control
Soft key menu 2/3
Display soft key menu 3/3
Display the selection menu for the event display method
(style number S3 or later)
Turns the event display ON/OFF (style number S3 or later)
Display the window for setting the program pattern control start delay time
Display the window for setting the program pattern start segment
Display the ON/OFF selection menu of program pattern display loops
Switch full display/split display
Soft key menu 3/3
Display soft key menu 1/3
Switch tag/tag comment display
Shift the displayed segment by +10 segments
Shift the displayed segment buy –10 segments
Program
pattern name
display
Selected pattern
number display
Pattern No. to be
run as a result of
communication
function, DI/DO, or
internal switch action
Selected segment*
number display
Selected segment*
time display
Segment range
to be repeated Repeat frequency
Display the program pattern
control start delay time
Start segment number display
Preset
pattern
waveform
* Segment displayed at the
left end. Select the segment
using the left and right
arrow keys.
Tag/Tag comment display
Target SP display of the
selected segment*
Unit display of the target SP
of the selected segment*