Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 185)

4-25
IM 04L31A01-01E
Control Function Related Setup Operations
4
4.9 PID parameters
This section explains the procedures for setting the PID control parameters of the control
function or the control parameters of the ON/OFF control.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > #4 soft key (select [PID parameters])
The following display appears.
• During PID control
• During ON/OFF control (when [Control] > [Output processing] > [Control output] is
set to [On/Off-control])
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next item box.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
Note
For setup item boxes that require values to be entered, a pop-up window that appears by
pressing the [Input] soft key is used.