Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 270)

8-13
IM 04L31A01-01E
Operations for Changing the Displayed Contents
8
3. Press the soft key corresponding to the message you wish to write.
A message mark, time, and the message itself are displayed on the trend display,
and the information is written to the internal memory.
Note
Step 3 above cannot be carried out if acquisition to the internal memory is stopped.
For Models with the Batch header (/BT1 Option)
1. Press the
FUNC key to display the soft key menu.
2. Press the [Message] soft key to display a list of messages.
[Write] and [Set] soft keys appear.
Displaying a message on the trend screen/Writing a message to the internal
memory
3. Press the [Write] soft key . Eight soft keys for the messages and a window
containing a list of messages are displayed.
4. Press the soft key corresponding to the message you wish to write.
A message mark, time, and the message itself are displayed on the trend display,
and the information is written to the internal memory.
Changing message strings
5. Press the [Set] soft key . The [Message1] to [Message3] soft keys and a window
containing a list of messages are displayed.
6. Press the soft key corresponding to the message to be changed. A window to
enter a message string appears.
7. Enter the massage using the character/number input key .
8. Press the DISP/ENTER key .
Setup Items
Setting the Messages
• Characters
Enter the message string using up to 16 alphanumeric characters. Up to 8 messages
can be entered (No. 1 to 8).
8.9 Measurement Function > Settings Related to Messages Displayed on the Trend Display and Write Operation