Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 319)

11-5
IM 04L31A01-01E
Operations of Other Functions
11
11.3 Key Operation Login/Logout
This section explains how to set the CX2000 so that only certain users can operate the
instrument, and how to log in and log out after the function is enabled.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch
to basic setting mode) > #4 soft key (select [Key login])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item boxes.
2. Press the soft key to set the values.
3. Press the DISP/ENTER key .
Saving the Settings in Basic Setting Mode
1. Press the ESC key .
The display returns to basic setting menu.
2. Press the [End] soft key .
A confirmation dialog box appears
3. Select [Yes] and press the DISP/ENTER key .
The operation screen is displayed.
Login Operation
1. Press the FUNC key .
A user name list window and a soft key menu appears.
2. Press the soft key corresponding to the user to be logged in.